medium range radios

  Industrial radio control

■  1 Mile ( line-of-sight with with 938432 or 938438 antenna
■  3 Miles (5 km) line-of-sight with 938433 antenna
■  1200. feet (300.m) in-building range with 938011 antenna
■  Dry isolated contact input N/O
■  Relay output SPDT 10AMP @240V Pilot Duty Class 2

Installation features
■  Operates in the license-free 433 MHz ISM band
■  Easy installation,
Matched set No programming required
■  Panel or wall mount 

Applications: Industrial Monitoring, Pump control, Monitor remote instruments, sensors and
detectors, Packing and mobile system, SCADA installations, Factory process control and alarms.



   Specifications        Digital Transmitter
Supply power 12 VDC @ 400 mA
Inputs  N/O Normally Open,  digital dry contact
Transmitter power per FCC Part 15.249,  50mV/m @ 3m
Transmission Digital Encoded Gaussian_frequency-shift_keying
Channels 16 addresses per system  GFSK
Connection Open wire or Terminal screws 
Response Loop 500 msec
Weight 1.8 lb (0.82kg)  each unit
Dimensions 12 x 8 x 6 in. / 300 x 200 x 150 mm


   Specifications       Digital Receiver 
Supply power 12 VDC  @ 300 mA
Outputs  Relay 10Amp SPDT 30Vdc/ 240Vac Class 2 
Frequency 433 MHz  • License free  Industrial
Configuration DIP switch factory preset
Transmission mode Supervised Tx Rx carrier
Compliance FCC CFR part 15.247
Antenna Z 50 Ohm SMA connector
Ambient temp  14 to 140 F (-10 to 60 C)
Enclosure  NEMA4, UL IP65 Fiber


DISCLAIMER:  Radio control equipment in not to be used in life safety.   Radio Installations shall be performed by a certified professional.

     Copyright   Electrodepot. All rights reserved